Buffalo Technology AirStation Pro WLA-AWCG - Manual (Page 10)

7 Getting Started
WLA-AWCG User Manual
2.1 About this chapter
This chapter explains how to set up the AirStation Pro system. It explains how to
connect the AirStation Pro to your PC and how to connect an external antenna.
2.2 Setting up the AirStation Pro
Before you begin establishing connections using the AirStation Pro, you must meet
the following requirements.
2.2.1 Hardware requirements
The AirStation Pro requires the following hardware to operate:
„
AirStation Pro WLA-AWCG
„
AC/DC power adapter
„
Straight-through network cable (Unshielded Twisted Pair (UTP) cable)
„
Antenna connector (only required if you want to connect to an external
antenna)
„
Network Adapter
This can be either of the following:
— LAN network card - if you want to establish a Wired connection using
the AirStation Pro
— AirStation Pro Wireless LAN card (WLI-PCM-L11) - if you want to
establish a Wireless connection using the AirStation Pro
You will receive the required hardware in the AirStation Pro pack as listed below.
AirStation Pro pack
„
AirStation Pro WLA-AWCG
„
AC/DC power adapter
„
AirStation Series Driver CD
„
Straight-through cable