Buffalo Technology AirStation Pro WLA-AWCG - Manual (Page 15)

Getting Started 12
WLA-AWCG User Manual
Attaching the antenna adapter
Prior to connecting an external antenna, you must attach an antenna adapter. To
attach the antenna adapter you must first disassemble the AirStation Pro.
To disassemble the AirStation Pro and attach the adapter, follow these steps.
1 Remove all screws from the AirStation Pro.
Figure 5: Removing screws from the AirStation Pro
2 Open the AirStation Pro shell. The Wireless LAN card is now visible.
Figure 6: Viewing the network card inside AirStation Pro
Before you begin to attach the antenna adapter, you must first turn off the
power on the AirStation Pro and unplug it.