Buffalo Technology AirStation Pro WLA-AWCG - Manual (Page 14)

11 Getting Started
WLA-AWCG User Manual
Installing an AirStation Wireless LAN card on a laptop PC
If you are using Windows 95/98 or 2000, you can install the network card whilst the
laptop is switched on. To install the network card, follow these steps:
1 Insert the Wireless LAN network card into the PC card slot.
Figure 4: Inserting a network card into a laptop PC
2 The power light on the network card will display green.
2.2.4 Adding an external antenna
An external antenna can be connected to the AirStation Pro in order to increase
the signal range of the AirStation Pro. The external antenna works very well for
building-to-building signal transmission.
Note: The Client Manager software must be installed on your machine before you
can check the quality of the connection to an external antenna. For
instructions on installing Client Manager, refer to the WLI-PCM-L11 User
Manual.
Insert the wireless LAN card into the PC card slot, applying
just enough pressure to ensure that it is fully seated.