Buffalo Technology AirStation Pro WLA-AWCG - Manual (Page 42)

39 AirStation Pro Installation
WLA-AWCG User Manual
10 Enter an IP Address in the IP Address field.
Enter the subnet mask in the Subnet Mask field.
Note: If you do not know an IP address and a subnet mask that corresponds with
the IP range of your network you should consult your network
administrator.
11 Click OK.
12 The Web browser will start automatically, and the Settings screen is
displayed.
Figure 36: Settings screen
Note: If the Web browser does not start automatically, you may need to check
your browser settings, for details see
Appendix, “Checking Web browser
settings” on page 82.
Checking basic settings of the AirStation Pro
To check the settings of your AirStation, follow these steps.
1 On the Settings screen, click Standard Settings.