Buffalo Technology AirStation Pro WLA-AWCG - Manual (Page 67)

Troubleshooting 64
WLA-AWCG User Manual
Network adapter is displayed with “!”.
Figure 52: Network adapter displayed with “!”
If this symbol is displayed beside the network adapter, you must do one of the
following to correct the error:
„
Re-install the network adapter driver, or,
„
Change the resources manually to avoid the conflict. Refer to your Windows
documentation for information on how to do this.
Network card is displayed with “X”.
If this symbol is displayed, this means that the adapter has not been installed
properly or that the settings are invalid.
To correct this error, you must do both of the following:
1 Re-install the network adapter.
2 Ensure that the settings are valid.