Buffalo Technology AirStation Pro WLA-AWCG - Manual (Page 36)

33 AirStation Pro Installation
WLA-AWCG User Manual
4.2.3 Installing the AirStation Manager Software
For security reasons the AirStation Manager software will only normally be
installed on the configuration PC. This means that only an administrator has access
to configure the AirStation Manager settings. To install the AirStation Manager, on
the configuration PC, follow these steps:
1 Insert the AirStation Series Driver CD into the CD-ROM drive. If the Simple
Installation Wizard dialog box is displayed, proceed directly to step 5.
Note: You should close all applications before beginning the installation process.
2 On the Start menu, select Run.
The Run dialog box is displayed.
Figure 26: Run dialog box
3 Enter d:\wleasy.exe (where d represents the CD-ROM drive) in the Open:
field.
4 Click OK.
The Simple Installation Wizard dialog box is displayed.
Figure 27: Simple Installation Wizard dialog box