JLG M4069 ANSI Service Manual - Manual (Page 65)

SECTION 3 - CHASSIS & SCISSOR ARMS
3121122 – JLG Lift – 3-37
Cover Disassembly
1. Remove O-ring (1) from the groove in the Cover (2).
2. Remove the Thrust Washer (3) from Cover pockets.
3. Unscrew the two Hex Head Bolts (4) and remove the
Disengage Cap (5) from the Cover.
4. Pull Disengage Rod (6) out of the Cover.
5. Use an appropriate tool to remove the O-ring (7)
from the internal groove in the Cover.
6. Remove the two O-ring Pipe Plugs (8) from the
Cover.
1. O-Ring
2. Cover
3. Thrust Washer
4. Hex Head Bolts
5. Disengage Cap
6. Disengage Rod
7. O-ring
8. O-ring Pipe Plugs
Figure 3-23. Cover Disassembly