JLG M4069 ANSI Service Manual - Manual (Page 114)

SECTION 5 - JLG CONTROL SYSTEM
5-18 – JLG Lift– 3121122
NOTE: When configuring an LE scissors machine, the machine configuration must be completed before any personality set-
tings can be changed. Changing the personality settings first and then changing the model number of the machine con-
figuration will cause the personality settings to return to default.
Table 5-4. Machine Configuration Programming Information
Configuration Digit Number Description
Default Number
0 1 2 3 4 5
1
(MODEL #)
0
1 3369LE
4069LE
0
2
(MARKET)
0
1
2
3
4
5 ANSI USA
ANSI EXPORT
CSA
CE
AUSTRALIA
JAPAN
0
3
(TILT CUTOUT)
0
1 NO - Drive & Lift Up not prevented when Tilted & Elevated
YES - Drive & Lift Up prevented when Tilted & Elevated.
1 1 1 0 1 1
4
(LEVELING JACKS)
0
1 NO - Leveling Jacks are not installed.
YES - Leveling Jacks are installed.
0
5
(CHARGER INTRLOK)
0
1 DRIVE - Drive is prevented when the vehicle is being charged.
DRIVE & LIFT - Drive & Lift Up are prevented when the vehicle is being
charged.
0
6
(GROUND ALARM)
0
1
2 NOT INSTALLED - The Ground Alarm shall not sound
DESCENT - The Ground Alarm shall sound during Lift Down
MOTION - The Ground Alarm shall sound during any vehicle motion.
1 1 1 1 1 2
7
(FUNCTION CUTOUT)
0
1
2 NONE
DRV & LFT UP - Only allows Lift Down when Function Cutout is active.
ALL FUNCTIONS - All functions are prevented when Function Cutout is
active
0
8
(4 WHEEL ASSIST)
0
1 NO - The 4 Wheel Assist option is not installed.
YES - The 4 Wheel Assist option is installed.
0
9
(LOAD)
0
1
2
NOT INSTALLED - Load Sensing System (LSS) is not fitted to the vehicle.
CUTOUT PLT - LSS is fitted, and Platform Controls are prevented in the
event of an Overload. Ground Controls remain functional. This is the
default setting for CE machines.
CUTOUT ALL - LSS is fitted. Platform and Ground Controls are
prevented in the event of an Overload
0 1 0 1 0 1
10
(TILT LIMIT)*
0
1 STANDARD - Normal tilt limits.
SPECIAL 1 - Vehicle tilt limits restricted to allow operation of a standard
3369LE in 16.7 m/s wind speeds for the CE Market.
NOTE: Tilt Limit selection is only visible for the 3369LE con-
figured for the CE Market. The selection will default
to STANDARD otherwise.
0 0 0 0 0 0
4150352_G