JLG 450A_AJ Series II Parts Manual - Manual (Page 287)

SECTION 4 - PLATFORM
3121243 450A Series II/450AJ Series II 287
FIGURE 4-2. PLATFORM INSTALLATION (USA BUILT MACHINES AND BELGIUM BUILT MACHINES)
(SN 0300069155 through 0300124000, SN 1300006000 to Present)
ITEM PART NUMBER QTY DESCRIPTION REV
Ref PLATFORM ASSEMBLIES:
3510832 Ref 6ft (1.83m) with No Mesh (Use p/n 1001144025) B-L
3510831 Ref 5ft (1.52m) with No Mesh (Use p/n 1001144026) B-L
3510830 Ref 4ft (1.22m) with No Mesh (Use p/n 1001144027) B-M
Ref Note: Original Equipment platform may have been replaced
with Service Replacement platform. Identify platform before
ordering parts.
Ref Note: Platform and Mesh must be ordered separately for
Platforms with Mesh. See SPECIAL OPTIONS SECTION for
Mesh Installations.
Ref Note: Replacement Decals Must be Ordered Separately - See
DECAL SECTION.
2 2080040 16 Fastener, Huck
3 2600281 2 Hinge, Self-Closing
4 2940074 1 Latch
5 3311001 2 Nut #10-24NC (USA Built Machines) (Prior to SN 0300077395)
5 3311001 2 Nut #10-24NC (Belgium Built Machines) (Prior to SN
1300000309)
6 See Note 1 Platform Weldment (Note: Not Available Purchase Platform
Assembly.)
7 3520072 1 Cap-Plug
8 Ref Fastener Options:
8 3900205 4 Screw #10-24NC (Prior to SN 0300077395, Prior to SN
1300000309)
8 3820020 4 Rivet, Pop (USA Built Machines) (SN 0300077395 through
0300124000)
8 3820020 4 Rivet, Pop (Belgium Built Machines) (SN 1300000309 through
1300006000)
9 4751000 2 Flatwasher #10 Regular (USA Built Machines) (Prior to SN
0300077395)
9 4751000 2 Flatwasher #10 Regular (Belgium Built Machines) (Prior to SN
1300000309)
10 4761000 2 Lockwasher #10 (USA Built Machines) (Prior to SN
0300077395)
10 4761000 2 Lockwasher #10 (Belgium Built Machines) (Prior to SN
1300000309)
11 Ref Gate Weldment Options:
11 4846452 1 Gate for Original Equipment Platform p/n 3510830, 3510831,
3510832
11 1001144629 1 Gate for Service Replacement Platform p/ns 1001144025,
1001144026, 1001144027
12 3520198 2 Plug, Square Tube
13 0100011 AR Compound, Locking (USA Built Machines) (Prior to SN
0300077395)
13 0100011 1 Compound, Locking (Belgium Built Machines) (Prior to SN
1300000309)
0271931 Ref CONSOLE BOX AND FOOTSWITCH INSTALLATION B
101 0641406 2 Bolt 1/4in-20NC x 3/4in
102 0641408 2 Bolt 1/4in-20NC x 1in
103 0641610 2 Bolt 3/8in-16NC x 1-1/4in
104 0861512 2 Platform Console Assembly (Not Shown) (See PLATFORM
CONSOLE ASSEMBLY for Breakdown)
104 0272970 1 Footswitch Assembly A