JLG 450A_AJ Series II Parts Manual - Manual (Page 181)

SECTION 2 - TURNTABLE
3121243 450A Series II/450AJ Series II 181
FIGURE 2-18. 2500W GENERATOR INSTALLATION - CATERPILLAR ENGINES (USA BUILT
MACHINES) (OPTIONAL)
ITEM PART NUMBER QTY DESCRIPTION REV
Ref GENERATOR INSTALLATION
Ref 110V/60Hz Generator (Available on all Specs Except
Australian and CE Specs)
0273050 Ref Generator (Prior to SN 0300087209) A
0274084 Ref Generator (SN 0300087209 through 0300124000) B
Ref 220V/50HZ Generator (Available on ANSI Export, Australian
and CE Specs)
0273051 Ref Generator (Prior to SN 0300087209) A
0274088 Ref Generator (SN 0300087209 through 0300124000) A
Ref Note: Refer to Sky Power Accessories Manual p/n 3124242 for
the Miller 7500W Generator.
1 0100011 AR Compound, Locking
2 0200742 1 Arm, Adjusting
3 Ref V-Belt Options:
3 0480122 1 V-Belt (110V) (Prior to SN 0300116112)
3 0480121 1 V-Belt (110V) (SN 0300116112 through 0300124000)
3 0480120 1 V-Belt (220V)
4 0641508 1 Bolt 5/16in-18NC x 1in
5 0641610 1 Bolt 3/8in-16NC x 1-1/4in
6 0641772 1 Bolt 7/16in-14NC x 9in
7 0701217 3 Bolt M12 x 45mm
8 0721008 2 Bolt #10-24NC x 1in
9 Ref Generator and Control Box Assembly Options:
9 2460032 1 Generator and Control Box Assembly (110V/60Hz) (Prior to SN
0300087209)
9 2460055 1 Generator and Control Box Assembly (110V/60Hz) (SN
0300087209 through 0300124000)
9 2460013 1 Generator and Control Box Assembly (220V/50Hz) (Prior to SN
0300087209)
9 2460056 1 Generator and Control Box Assembly (220V/50Hz) (SN
0300087209 through 0300124000)
9A 7012558 1 Generator and Control Box Assembly (110V/60Hz Generator)
9A 1001100321 1 Generator and Control Box Assembly (220V/50Hz Generator)
Ref Note: All Replacement Generators come standard with
P/N 3580134 Pulley. This Pulley may not be correct for all
applications. Refer to Pulley options below.
9A 7026199 1 Generator and Control Box Assembly (110V/60Hz Armature
with Slip Rings)
9A 70000123 1 Generator and Control Box Assembly (220V/50Hz Armature
with Slip Rings)
9A 7020109 4 Holder, Brush
9A 7020108 4 Brush
9A 7012513 4 Cap, Brush Holder
9A 7012514 1 Fan
9A 7020190 2 Bearing
9A 7020110 1 End Bell, Front
9A 7020111 1 End Bell, Rear
9A 7020193 1 Cord, Power
9B Ref Control Box Options:
9B Ref Control Box (110V/60Hz)
9B 7003657 1 Control Box (Prior to SN 0300087209)