Eppendorf Multipette Xstream - Manual (Page 41)

41
Maintenance
Multipette ® /Repeater ® (X)stream
English (EN)
7 Maintenance
7.1 Cleaning
Perform the following steps:
1. Carefully remove the contamination around the Combitip holder with a cotton bud.
2. Carefully wipe the housing of the Multipette stream/Repeater stream with a slightly
damp or dry cloth.
7.2 Maintenance
We recommend that you have all maintenance and servicing carried out by Eppendorf AG
or Eppendorf service partners. No warranty is provided for any damage due to misuse or
if the device has been opened by unauthorized persons.
NOTICE! Damage to device from unsuitable cleaning fluids or sharp or
pointed objects.
Unsuitable cleaning fluids can damage the device.

Never use corrosive cleaning fluids, strong solvents or abrasive polishes.

Check the compatibility with the materials used.

Please note the information on chemical resistance (see CD).

Do not clean the Multipette stream/Repeater stream with acetone or organic
solvents with a similar effect.

Do not clean theMultipette stream/Repeater stream with sharp objects.
NOTICE! Damage to the device due to penetration of liquids.

Do not allow any liquids to penetrate the inside of the housing.

If liquid has entered the inside of the housing, the inner parts may only be
repaired by Eppendorf AG service partners. Contact your responsible sales
office before returning a product.