Eppendorf Multipette Xstream - Manual (Page 13)

13
Product description
Multipette ® /Repeater ® (X)stream
English (EN)
2.6 Overview Combitips advanced
Combitips advanced are disposable devices for aspirating and dispensing liquids
according to the positive displacement principle. Combitips advanced are used in
Eppendorf dispensers (e.g., Multipettes/Repeaters) and are made up of a cylinder and a
piston. Combitips advanced in sizes 25 mL and 50 mL require an Adapter advanced.
Combitips advanced are available in various sizes, which are marked using a color code.
Abb. 2-3:Display
Fig. 2-3: Display
1 Volume
Unit in μL or mL.
2 Direction of the next piston movement
Aspirate liquid
Dispense liquid
3 Key lock
is only displayed if the +/- rocker switch is locked.
Can be stored or activated for the device parameters
(see p. 34).
4 Battery
Battery charging status. Possible displays:
Battery full
Battery exhausted
Battery severely discharged
Battery empty
If the battery is exhausted, complete the dispensing
operation and charge the battery. If the battery is
severely discharged, or
Warning Battery Low!
appears on the display, stop the dispensing
operation
immediately and charge the battery for at
least two hours.
5 Dispensing step
In the Dis, Ads and Seq modes, the number of
possible dispensing steps. In the Asp mode, the
number of performed Asp steps
6 Interpunct
Is displayed in the Dis, Ads and Asp modes before
aspiration. Indicator for the number of dispensing
steps. The pipetted volume must always be greater
than the product of the multiplication of the volume
(
1) with the dispensing step (5).
20 • µL
100.0
2 3 4
1 6 5