Eppendorf Multipette Xstream - Manual (Page 26)

26
Operation
Multipette
® /Repeater ® (X)stream
English (EN)
If you eject the Combitip before pressing the actuate key, the changes will not be
saved.
6. You can find further details in the chapter on your selected operating mode.
Dispensing is performed with the actuate key. If you press the actuate key or the reset
key during liquid aspiration or dispensing operations, you will interrupt the dispensing
operation.
5.3 Parameters of the Multipette stream/Repeater stream
CAUTION! Personal injury and damage to the Multipette stream/Repeater
stream and to the Combitip by operating the ejector at the wrong time.
If you eject the Combitip during dispensing, liquid may escape. If the ejector is
operated at the wrong time, only the cylinder of the Combitip is released. The
piston can only be released if it is in the basic position.

Only operate the ejector when the piston in the Combitip has reached its
lowest position.
Display Parameter function Dis Ads Seq Asp Pip Ttr
Dispensing volume
Depends on the size of the
inserted Combitip.
● ● – – ● –
Dispensing volume per
dispensing step
Depends on the size of the
inserted Combitip. Up to
16 different volumes can be
selected.
– – ● – – –
Aspiration volume
Depends on the size of the
inserted Combitip.
– – – ● – –
Number of dispensing steps
The number of dispensing steps
depends on the dispensing
volumes.
● ● ● ● – –
Aspiration speed
10 speeds are available. The
total of number of bars filled in
black represents the speed level
selected. The higher the speed,
the lower the electric power
consumption.
● ● ● ● ● ●
50
Set volume
• mL
0.20
4
Set volume:
μL
50
50
Set volume
• mL
0.20
50 Set steps:
Speed