Eppendorf Multipette Xstream - Manual (Page 20)

20
Installation
Multipette
® /Repeater ® (X)stream
English (EN)
4.3 Charge the rechargeable battery
Recharging the rechargeable battery
1. Insert the assembled power supply (order number 4986 603.005) into a power outlet.
2. Check in the Multipette stream/Repeater stream whether a rechargeable battery has
been inserted and connected.
3. Insert the charging plug of the power supply into the connector socket of the
Multipette stream/Repeater stream.
The message
Device connected to power supply is briefly displayed. The charging
process is indicated in the display by a flashing rechargeable battery symbol. A fully
discharged accumulator requires a charging time of at least two hours. The charging
process is complete when the accumulator symbol stops flashing.
The rechargeable battery only achieves its full capacity after several charging cycles.
WARNING! Incorrect or damaged mains/power supply devices can lead to
severe personal injury or damage to the device.
Incorrect or damaged mains/power supply devices may cause electric shocks,
cause the device to overheat, catch fire, melt, short circuit or similar damage.

Only use the mains/power supply device which is included in the delivery for
charging the battery. You can recognize the correct mains/power supply
device from the Eppendorf logo and the device name on the power supply.

Do not use damaged mains/power supply devices.
The supplied Multipette stream/Repeater stream can only be charged with the
new power supply unit (order number 4986 603.005) included in this delivery. It
is technically not possible to charge this Multipette stream/Repeater stream with
a power supply unit from an older delivery. However, older Multipette stream/
Repeater stream models can be charged with the new power supply unit
included in this delivery. Every charging stand of the Multipette stream/Repeater
stream can be operated with a new power supply unit.
To identify the power supply, each unit is provided with a label with the names
"Multipette stream/Xstream", "Repeater stream/Xstream" and "Xplorer". The
power supply is designed for the range from 100 - 240 V.
Multipette ® stream/Xstream
Repeater ®
stream/Xstream
4986 603.005
Xplorer ®