Eppendorf Multipette Xstream - Manual (Page 35)

35
Operation
Multipette ® /Repeater ® (X)stream
English (EN)
To access the device settings, proceed as follows:
1. If a Combitip is in the Multipette stream/Repeater stream: press ejector.
The display then shows:
2. Press both rocker switches up at the same time.
The following appears briefly in the display:
3. Select the parameter to be changed using the select rocker switch.
4. Change the setting of the selected parameter using the +/- rocker switch.
5. Press the actuate key to exit the menu.
When the settings have been successfully saved, the following appears briefly in the
display:
TIP:
Insert Combitip
Entry
system settings
Changed data
stored