IKA HBC 10 control - Manual (Page 51)

51
Technical data
IC control HBC 5 control HBC 10 control
Nominal voltage VAC 230 ±10% (EURO) ...115 ±10% (USA)
Frequency Hz 50/60
Max. input Power W 2650 (230 VAC)/1400 (115 VAC)
Working temperature range (RT+10 at 1000rpm) °C RT + 10 ... 250
Operating temperature range
(with external cooling)
°C -20 ... 250
Temperature stability – Internal temperature
control 70°C, water (according to DIN12876)
K ± 0,01
Temperature control PID (Automatic/user setting)
Temperature measurement, absolutely accuracy
Internal (int) (adjustable by calibration)
External (ext) (adjustable by calibration)
K
K
±0,2
±0,2
External Pt 100.5 temperature sensor tolerance
to DIN EN 60751 class A, ≤ ± (0.15 + 0.002 x |T|),
e.g. at max. 100°C (adjustable by calibration)
K ±0,35 (at 100°C)
Temperature setting Knob on Wireless Controller (WiCo)
Temperature setting resolution K 0,1
Temperature display TFT LCD on WiCo
Temperature display resolution K 0,01
Classification according to DIN 12876-1 Class III (FL) suitable for flammable and non-flammable fluids
Safety circuit (adjustable) °C 0 ... 260
Safety temperature display TFT LCD on WiCo
Heating capacity W 2500 (230 VAC)/1250 (115 VAC)
Pump speed (adjustable) rpm 1000 ... 4600
Max. pump pressure/suction bar 0,7/0,4
Max. flow rate (at 0 bar) l/min 26
Bath volume I -/- 5 – 7 8 – 11
Sub-level protection Yes
Interface RS 232, USB, Multi-function interface
Permitted on-time % 100
Protection class according to EN 60529 IP 21
Protection class I
Excess voltage category II
Contamination level 2
Permitted ambient temperature °C +5 ... +40
Permitted ambient humidity (relative) % 80
Dimension (W x D x H) mm 285 x 291 x 313 275 x 500 x 406 275 x 510 x 456
Weight kg 8,8 17,3 18,3
Operation at a terrestrial altitude m max. 2000
Wireless Controller
Permitted on time
% 100
Max. communication distance
(dependent on the building)
m 40 – 150
Dimensions (W x D x H) mm 160 x 37 x 105
Weight kg 0,3
Ambient temperature °C +5 ... +40
Ambient humidity (relative) % 80
Protection class according to EN 60529 IP 42
Interface USB
RB 1 Battery pack
Voltage
V 3,7
Charging capacity mAh 2000
Charging time h 4,5
Working time h 15
Battery type Lithium-polymer
Subject to technical changes!