Advance Adapters 48-6400 - Manual (Page 8)

ADVANCE ADAPTERS INC. P/N: SUZUKI
P.O. Box 247, 4320 Aerotech Center Way New Item: (09/09)
Paso Robles, CA 93447 PAGE 8 OF 11
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 09-09-09
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components
will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we
strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter
components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment.
These manuals are normally available at automotive dealerships and parts stores.
SUZUKI GEARS KIT NUMBERS
48-4160 / 48-4900 /48-6400
33. Slide the high/low shift rail onto the output gear assembly.
34. Slide the gear assembly into the center housing.
35. Install the front shift collar onto the shift fork.
36. Tap the output assembly into place using a rubber hammer
37. Apply grease to the face of the thrust washer and place the thrust washer to the center housing making sure the
washer tab fits to the notch in the housing.