Advance Adapters 48-6400 - Manual (Page 4)

ADVANCE ADAPTERS INC. P/N: SUZUKI
P.O. Box 247, 4320 Aerotech Center Way New Item: (09/09)
Paso Robles, CA 93447 PAGE 4 OF 11
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 09-09-09
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components
will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we
strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter
components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment.
These manuals are normally available at automotive dealerships and parts stores.
SUZUKI GEARS KIT NUMBERS
48-4160 / 48-4900 /48-6400
18. Remove the output shaft and gear assembly from the rear housing.
19. Remove the snap ring from the end of the output shaft.
20. Remove the gear.
21. Using a press, press the output shaft through the bearing.
22. Remove the bearing, gear spacer & high speed gear.
23. Under the gear is a caged needle bearing and a shifter hub that must also be removed.
24. Turn the shaft assembly over and press the low speed gear off the shaft. The bearing keeper bearing speedometer
gear and gear spacer will be removed first. Stack these components as they come off to aid in re-assembly.