Advance Adapters 48-6400 - Manual (Page 10)

ADVANCE ADAPTERS INC. P/N: SUZUKI
P.O. Box 247, 4320 Aerotech Center Way New Item: (09/09)
Paso Robles, CA 93447 PAGE 10 OF 11
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 09-09-09
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components
will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we
strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter
components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment.
These manuals are normally available at automotive dealerships and parts stores.
SUZUKI GEARS KIT NUMBERS
48-4160 / 48-4900 /48-6400
42. Apply silicone to the case haves and install the gasket. Slide the case two haves together making sure the thrust
washer stays in place. Once the cases are aligned and slide together, install the 11 bolts back to there original
location.
42A. You may have to twist the
cluster pin in the case to install
the locking tab.
43. Apply silicone to the front housing and apply the gasket. Bolt the housing to the case making sure the correct bolt
placement.