Advance Adapters 48-6400 - Manual (Page 11)

ADVANCE ADAPTERS INC. P/N: SUZUKI
P.O. Box 247, 4320 Aerotech Center Way New Item: (09/09)
Paso Robles, CA 93447 PAGE 11 OF 11
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 09-09-09
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components
will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we
strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter
components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment.
These manuals are normally available at automotive dealerships and parts stores.
SUZUKI GEARS KIT NUMBERS
48-4160 / 48-4900 /48-6400
44. Install the yokes on to the transfer case and stake them to the shafts. The rear yoke is the taller yoke and is different
than the other two.
43. Reinstall the steel ball in the bottom of the case followed by the spring and the detent plug.
44. Install the speedometer drive unit and the retaining bolt.
45. Install the 4WD indicator ball and the switch.
46. Install the transfer case back into the vehicle, install the shifter handle and fill with the 80/90W GL5 gear oil.