Snorkel SB80 - Manual (Page 4)

4
Controls and Indicators
NOTE: Boom will not extend or raise beyond 45
degrees unless axles are fully extended.
12. With the boom elevated five degrees or greater or
extended 0,3 m (1 foot), operate drive control
handle. Observe that drive speed is limited to creep
(0,3 m [1 foot] per second). Lower upper boom to
stowed position.
13. Press the service horn button. Observe that horn is
audible.
NOTE: Hand interlock controls drive/steer and boom
rotate functions only.
NOTE: Foot switch controls boom functions only.
14. Level the platform while it is in the stowed position.
DO NOT use a machine that is damaged or
malfunctioning. Tag and remove the unit from
service until it is repaired.
Figure 4: Chassis Controls
1. Oil pressure gauge
2. Water temperature gauge
3. Hourmeter
4. Emergency stop
5. Key switch
6. Engine start
7. Glow plug (Diesel only)
8. Auxiliary power for emergency lowering only
9. Function enable
10. Boom control
11. Boom extension control
12. Turret control
13. Jib control
14. Cage rotation
15. Cage level control
16. Circuit breaker
Figure 3: Foot Switch
Figure 1: Platform Controls
Figure 2: Locking pin
Figure 5: Platform Controls
17. Axle Extend/Retract
18. Lights (optional)
19. Generator (optional)
20. Horn Button
21. Emergency stop
22. Axles Extended indicator
23. Tilt warning indicator
24. Low oil pressure indicator
25. Torque/Speed selector
26. Glow plug (Diesel only)
27. Auxiliary power for emergency lowering only
28. Boom Raise/Lower and Turret Rotate control
29. Boom Extend/Retract
30. Cage Rotate
31. Jib Raise/Lower
32. Cage Level
33. Drive control handle/interlock
34. Engine start
35. Foot interlock switch
35
18 19 20 21 22
24 25 26 27
28 29 30
31 32 33
23
17
1
5
4
9
8
12
13
2 3
16
6
7
10
11
14
15
34