Apple WebObjects 3.5 - Manual (Page 35)

Building and Running Your Application
35
Building and Running Your Application
1. Make Project Builder active. A quick way to do this from WebObjects
Builder is to choose View Source File from the pull-down menu at the
bottom of the window.
To build and launch your application, you use buttons in Project
Builder’s toolbar.
2. Click in the toolbar to open the Project Build panel.
3. Click in the Project Build panel.
The Project Build panel displays the commands that are being
executed to build your project. If all goes well, it displays the status
message “Build succeeded.”
4. Close the panel.
5. Click in the toolbar to open the Launch panel.
Click here to open the Project Build panel.
Click here to open the Launch panel.
Click here to build
your application.