Class1 118253 - ITL40 108404-XX - Full - Manual (Page 20)

FORM-ENG-0018 REV A 05-27-03
PAGE 19 of 25 S U I T A B L E F O R E X T E R N A L D I S T R I B U T I O N
OPERATION MANUAL
DATE 9/24/2008
PRODUCT GROUP ITL40 P/N 118404-XX REV 1.00
607 NW 27th Ave
Ocala, FL 34475
Ph: 352-629-5020 or 1-800-533-3569
Fax : 352-629-2902 or 1-800-520-3473 PRODUCT Intelli-Tank Level 40 BY AMS
MANUAL P/N:118253 P RINTED : 1/8/09
6.3.3. CAN method, 1 MASTER and 2 REMOTES
System configured with CAN communication method. This example shows one MASTER display (configured with
address 1) communicating with 2 REMOTE displays (configured with address 1).
Two CAN terminating resistors (p/n DT06-3S-P006) are required in the system (one at each end of the CAN bus).
6.3.4. CAN method, 2 MASTERS and 2 REMOTES
System configured with CAN communication method. This example shows two MASTER displays (configured
with address 1 and address 2) communicating with 2 REMOTE displays (configured with address 1 and address 2).
REMOTE display address 1 only follows the indications of MASTER display address 1, and REMOTE display
address 2 only follows the indications of MASTER display address 2.
Two CAN terminating resistors (p/n DT06-3S-P006) are required in the system (one at each end of the CAN bus).