beautypg.com

Engine id (source id of received engine messages), Technical data sheet – Class1 117155 - TPG Governor - 117684 EXTERNAL User Manual

Page 23

background image

FORM-ENG-0018 REV A 05-27-03

607 NW 27th Ave

Ocala, FL 34475

Ph: 352-629-5020 or 1-800-533-3569

Fax : 352-629-2902 or 1-800-520-3473

TECHNICAL DATA SHEET

PAGE

22

OF 26

DATE

3/28/2012

PRODUCT GROUP

THROTTLE CONTROL

P/N

117155

REV

1.23

PRODUCT

TOTAL PRESSURE GOVERNOR (TPG)

BY

AMS


Manual P/N 117684

5.2.41. ENGINE ID (Source ID of received engine messages)

This menu item allows configuration of the CAN source ID for engine messages received by the TPG.
The display will show

EngineID=X

. Use the INC and DEC switches to adjust the CAN engine source ID.

If the TPG continuously displays the NO COMM DATA message with the engine running and the CAN bus
connected verify the setting of this parameter. Where the TPG is directly connected to the engine’s CAN bus the
address should usually be 0 but if there is a gateway module between the engine and TPG then this parameter
needs to be set to the address from which the gateway module transmits.

Range = 0 – 255.

[default = 0]