Important application specific settings, Engine, Cam/crank – AEM Infinity Supported Applications - Honda 2001-2005 K-Series Engine User Manual

Page 4: Injector setup, Input function assignments, Ignition sync, Infinity tuner wizard setup engine

IMPORTANT APPLICATION SPECIFIC SETTINGS

Infinity Tuner Wizard Setup

Engine

In the Wizard Engine tab confirm the following settings:

Number of Cylinders

= 4

Engine Cycle Type

= 4 Stroke

Ignition Type

= Sequential (Coil On Plug)

Firing Order

= 1-3-4-2

Cam/Crank

In the Wizard Cam/Crank tab confirm the following setting:

Honda (2001–2005, K Engine)

Add a text grid control to your layout and select the following channels. Make sure their values match
the settings below for initial timing sync. These values will be populated when the Cam/Crank pattern is
selected.

TrigOffset [degBTDC]

= 22.00

CamSyncAdjustment

= 1.00

Injector Setup

In the Wizard Injector Setup tab confirm the following setting:

Number of Injectors = 4

Input Function Assignments

In the Wizard Input Function Assignments tab confirm the following setting:

AC Request Switch Setup =

Digital 6 (applicable to K-Series swapped installations only). The RSX
and RSX-Type-S use Honda serial bus data for the A/C switch input. This
is not supported by Infinity.

Ignition Sync

See QuickStart Guide section Setup: Ignition Sync for instructions on timing sync.