AEM Infinity Supported Applications - Honda 2001-2005 K-Series Engine User Manual
Page 10
10
© 2014 AEM Performance Electronics
Infinity
Pin
Hardware Reference
7100-XXXX-62
7101-XXXX-63
Function
Dest. Pin
Honda K
Hardware Specification
Notes
C1-44
HighsideSwitch_0
VTEC
B15
0.7A max, High Side Solid State
Relay
See Setup Wizard page 'HighSide
Assigment Tables' f or conf iguration
options.
See 2D lookup table 'HS0_Table' f or
activ ation settings.
See Setup Wizard page 'VTEC' f or
def ault activ ation criteria.
C1-45
Crankshaf t Position
Sensor VR+
Crankshaf t
Position Sensor
VR+
Dif f erential Variable Reluctance
Zero Cross Detection
See Setup Wizard page Cam/Crank f or
options.
C1-46
Crankshaf t Position
Sensor VR-
Crankshaf t
Position Sensor
VR-
See Setup Wizard page Cam/Crank f or
options.
C1-47
Camshaf t Position
Sensor 1 VR-
Camshaf t
Position Sensor
1 VR-
Dif f erential Variable Reluctance
Zero Cross Detection
See Setup Wizard page Cam/Crank f or
options.
C1-48
Camshaf t Position
Sensor 1 VR+
Camshaf t
Position Sensor
1 VR+
See Setup Wizard page Cam/Crank f or
options.
C1-49
VR+_In_2
Non Driv en Lef t
Wheel Speed
Sensor +
Dif f erential Variable Reluctance
Zero Cross Detection
See Non Driv en Wheel Speed
Calibration in the Setup Wizard Input
Function Assignment page.
C1-50
VR-_In_2
Non Driv en Lef t
Wheel Speed
Sensor -
C1-51
VR-_In_3
Driv en Lef t
Wheel Speed
Sensor -
Dif f erential Variable Reluctance
Zero Cross Detection
See Driv en Wheel Speed Calibration in
the Setup Wizard Input Function
Assignment page.
C1-52
VR+_In_3
Driv en Lef t
Wheel Speed
Sensor +
C1-53
DBW1 Motor -
DBW Motor
Control Close
5.0A max Throttle Control
Hbridge Driv e
+12V to close
C1-54
DBW1 Motor +
DBW Motor
Control Open
5.0A max Throttle Control
Hbridge Driv e
+12V to open
C1-55
Power Ground
Ground
A24
Power Ground
Connect directly to battery ground.
C1-56
Injector 6
Injector 6
Saturated or peak and hold, 3A
max continuous
Injector 6
C1-57
Injector 5
Injector 5
Saturated or peak and hold, 3A
max continuous
Injector 5
C1-58
Injector 4
Injector 4
B2
Saturated or peak and hold, 3A
max continuous
Injector 4