20 :status subsystem, Stat, Ubsystem – BNC 835 Programmer Manual User Manual
Page 59: Status subsystem
Berkeley Nucleonics Corporation 2955 Kerner Blvd., San Rafael, CA 94901
Phone: 415-453-9955, Fax: 415-453-9956, Email: [email protected], Web: www.berkeleynucleonics.com
5.20
:STATus Subsystem
This subsystem controls the status-reporting structures.
Command
Parameters
Unit
(default)
Remark
:STATus:OPERation[:EVENt]?
:STATus:OPERation:CONDition?
:STATus:OPERation:ENABle
:STATus:OPERation:PTR
:STATus:OPERation:NTR
:STATus:PREset
:STATus:QUEStionable[:EVENt]?
:STATus:QUEStionable:CONDition?
:STATus:QUEStionable:ENABle
:STATus:QUEStionable:PTR
:STATus:QUEStionable:NTR
:OPERation?
:STATus:OPERation[:EVENt]?
This query returns the contents of the operation status event register and clears it.
:OPERation:CONDition?
:STATus:OPERation:CONDition?
This query returns the contents of the operation status condition register.
:OPERation:ENABle
:STATus:OPERation:ENABle
This command sets the enable mask of the operation status event register.
:OPERation:PTR
:STATus:OPERation:PTR
This command sets the positive transition filter of the operation status event register.
:OPERation:NTR
:STATus:OPERation:NTR
This command sets the negative transition filter of the operation status event register.
:PRESet
:STATus:PRESet
Disables all status events, clears all negative transition filters and sets all positive transition filters.