BNC 835 Programmer Manual - Manual (Page 50)

Berkeley Nucleonics Corporation 2955 Kerner Blvd., San Rafael, CA 94901
Phone: 415-453-9955, Fax: 415-453-9956, Email: [email protected], Web: www.berkeleynucleonics.com
:PM:SOURce
[SOURce]:PM:SOURce EXTernal | INTernal
[SOURce]:PM:SOURce?
This command selects the PM modulation signal source. If INTernal is selected, an internal modulation
source is applied. If EXTernal is selected, the device’s M input (a t the re a r pa
*RST EXT
:PM:STATe
[SOURce]:PM:STATe ON|OFF|1|0
[SOURce]:PM:STATe?
This command turns the phase modulation on or off.
*RST OFF