BNC 835 Programmer Manual - Manual (Page 23)

Berkeley Nucleonics Corporation 2955 Kerner Blvd., San Rafael, CA 94901
Phone: 415-453-9955, Fax: 415-453-9956, Email: [email protected], Web: www.berkeleynucleonics.com
5.2 :INITiate Subsystem
The :INITiate subsystem controls the state of the BENCHTOP MICROWAVE SOURCE trigger system.
The subsystem commands and parameters are described below. The :INITiate commands, along with
the :ABORt and :TRIGger commands, comprise the Trigger Group of commands.
Command Parameters Unit
(default)
Remark
:INITiate[:IMMediate] ON
:INITiate:CONTinuous ON|OFF|1|0 OFF
:INITiate[:IMMediate]
Sets trigger to the armed state.
:INITiate:CONTinuous ON|OFF|1|0
Continuously rearms the trigger system after completion of a triggered sweep.