BNC 835 Programmer Manual - Manual (Page 28)

Berkeley Nucleonics Corporation 2955 Kerner Blvd., San Rafael, CA 94901
Phone: 415-453-9955, Fax: 415-453-9956, Email: [email protected], Web: www.berkeleynucleonics.com
5.6 [SOURce]:PHASe Subsystem
Command Parameters Unit
(default)
Remark
[SOURce]:PHASe:REFerence
[SOURce]:PHASe[:ADJust] 0 radians
:PHASe:REFerence
[SOURce]:PHASe:REFerence
This command sets the current output phase as a zero reference. Subsequent phase adjustments are
set relative to the new reference.
:PHASe[:ADJust]
[SOURce]:PHASe[:ADJust]
[SOURce]:PHASe[:ADJust]?
This command adjusts the phase of the signal. The query will only return values in radians.
*RST The preset value is 0.