BNC 835 Programmer Manual - Manual (Page 24)

Berkeley Nucleonics Corporation 2955 Kerner Blvd., San Rafael, CA 94901
Phone: 415-453-9955, Fax: 415-453-9956, Email: [email protected], Web: www.berkeleynucleonics.com
5.3
:OUTPut Subsystem
Command Parameters Unit
(default)
Remark
OUTPut[:STATe] ON|OFF|1|0 OFF
OUTPut:BLANking[:STATe] ON|OFF|1|0 OFF
[:STATe] ON|OFF|1|0
:OUTPut[:STATe] ON|OFF|1|0
Turns RF output power on/off.
:BLANking[:STATe] ON|OFF|1|0
:OUTPut:BLANking[:STATe] ON|OFF|1|0
:OUTPut:BLANking[:STATe]?
ON causes the RF output to be turned off (blanked) during frequency changes. OFF leaves RF output
turned on (unblanked).