JLG G6-42P Service Manual - Manual (Page 74)

Section 5 - Attachments
5-12 31200148
Crane Hook
Description P/N
Crane Hook................................................................... 91565094
Use Appropriate Carriage Attachment Capacity Chart
To determine maximum capacity, refer to “Telehandler/Attachment/Fork Capacity” on
page 5-3.
Suspend loads in accordance with requirements set forth in Section
1 - General Safety Practices.
The joystick (1) controls lift/lower and the extend/retract movement of the boom.
The tilt lever (2) controls the crane hook tilt.
• Move lever forward to tilt down.
• Move lever back to tilt up.
Installation Procedure:
• Refer to “Attachment Installation” on page 5-7.
• Secure the crane hook to the forks by sliding the crane hook onto the parent
forks and install the retaining pin behind the vertical shank of the fork.
OY0640
TILT SPEED CONTROL
1
2