JLG G6-42P Service Manual - Manual (Page 344)

52
Section 6
Specifications
CAUTION
• The operating temperature of the coolant must
never reach or exceed 250°F (120°C). If the
operating temperature of the coolant reaches
or exceeds 250°F (120°C), the internal
components of the brake will be damaged. A
forced cooling system may be required to
assure the coolant temperature remains below
250°F (120°C).
• Use only the brake hydraulic fluid specified by
the manufacturer of the vehicle. Do not use
different hydraulic fluids. The wrong fluid will
damage the seals on the piston.
PRA 352 Series Planetary Drive Axle
Oil Change Intervals and Specifications
Off-Highway
Operation Intervals ①
Initial Check Petroleum Synthetic
Oil Oil Oil Oil Meritor Military Oil
Change Level Change Change Specification Specification Description
100 250 1,500 — 0-84 — Petroleum Base
operating operating operating SAE 10W, 20W
hours hours hours or 10W/30 ②
① ① or twice a
or year (which-
1240-3100 ever comes
miles first)
(2000-5000
km)
(whichever
comes first)
NOTES:
① The checking interval depends on the individual operating conditions, speeds and loads. Severe operating conditions may require more
frequent intervals.
② Tractor oil universal fluid, ‘TOU’ types formulated for wet disc brakes, is recommended for use in the wet disc brake housing. Make sure
that the specifications of the tractor fluid are the same as the recommended specifications of the vehicle manufacturer.
!