OR-Fab 83205 ROCK SLIDER REAR BUMPER JEEP JK - 2/4 DOOR - Manual (Page 4)

4 Rock Slider Rear Bumper - Kit 83205
2. Install kit bumper on vehicle.
a. Slide kit bracket (nut plate) into each frame rail.
Kit Nut Plate Frame Rail
b. Place assembled bumper onto vehicle making
sure bolt tab on kit bumper is under the kit
bracket (plate, rear). Loosely install four kit
bolts (1/2” x 1 1/2”) and four kit washers (7/16”
USS) into kit bracket (nut plate).
c. Install four factory bolts in kit bumper (driver)
Kit Bumper
Kit Bolts (1/2” x 1 1/2”),
Kit Washers (7/16”
USS)
Kit Bumper
(driver)
Install bumper
(plate, rear) on
top of tab weld-
ed on center of
bumper.
Kit Bumper
Tab
Factory Bolts