Fluid Management 22CW Blendorama - Manual (Page 4)

FAST & FLUID MANAGEMENT
PAGE NO. 4 of 27
CW - V1.2 – 10- 05- 2012 (36609) – rev, B
B - Standard Terms & Conditions of Sale (cont’)
5. Limitation of Liability
Subject to Paragraph 6 of these terms and conditions and in particular sub-paragraph 6.7 hereof the
seller shall neither be subject to nor incur, and the Buyer releases the Seller from any claim or liability
(including consequential loss or damage, loss or use or profit) by reason of delay, defective or faulty
components or materials or workmanship, negligence, or any act, matter or thing done admitted or
omitted by the Seller or by reason of the unsuitability of the Product for the Buyer's , purpose and the
Buyer acknowledges that it did not rely on the skill or judgment of the Seller in selecting and
ordering the Product for the purpose for which the same was required by the Buyers.
5.1 Product Return
Subject to paragraph 6 hereof or as otherwise agreed by the Seller the Buyer may not return the
Product or any part or parts thereof after delivery has been effected. Any claim or claims for return of
the Product or any Parts thereof must be made within 30 days of delivery of the Product to the Buyer.
6. Warranty
The Seller hereby warrants to the Buyer that the Product will be free from defects in materials and
workmanship in normal use, service and operation for a period of twelve (12) months from the date of
delivery effected by the Seller or one of its authorized Distributors to the Buyer.
The first year of the warranty period covers parts and labor. If any Paint Equipment fails during normal
operation, use and service during the first year of the warranty period due to a defect in material or
workmanship, Fluid Management will repair the defective Paint Equipment and replace any defective
parts at no charge to the Customer. The warranty repairs and defective parts replacement will be
carried out by Fluid Management or one of its Authorized Service Representatives. .
The above warranty and obligations are subject to the WARRANTY CONDITIONS, EXCLUSIONS
AND LIMITATIONS and the WARRANTY DISCLAIMERS AND LIABILITY LIMITATIONS set forth
below.
6.1 WARRANTY CLAIMS
Warranty claims must be asserted during the warranty period. While Paint Equipment is under
warranty, no repair or part replacement should be undertaken without first contacting Fluid
Management at 800-462-2466. To expedite the process, the model and serial numbers of the Paint
Equipment should be available at the time of the call.
6.2 WARRANTY CONDITIONS, EXCLUSIONS AND LIMITATIONS
Fluid Management shall have no liability or obligation under its warranty in connection with any
warranty claim asserted or any failure or malfunction occurring after the expiration of the warranty
period.
As a condition to any warranty repair or part replacement, Fluid Management shall have the right to first
inspect, test and evaluate the Paint Equipment and parts that are claimed to be defective.
Return of Paint Equipment and parts to Fluid Management requires a Return Goods Authorization
(RGA) from Fluid Management, and the RGA number must be included with any returned Paint
Equipment or part.
Customer shall be required to provide Fluid Management and its Authorized Service Representatives
with all information that any of them may request concerning the maintenance, operation, use, service,
failure or malfunction of Paint Equipment and parts that are claimed to be defective.
Fluid Management may use reconditioned parts for warranty repairs and parts replacement.