Fluid Management 22CW Blendorama - Manual (Page 11)

FAST & FLUID MANAGEMENT
PAGE NO. 11 of 27
CW - V1.2 – 10- 05- 2012 (36609) – rev, B
V OPERATION
A - First time operation
Step 1 Preparing the dispenser
>
Ensure that the machine is
switched off at the wall socket Stir each can of colorant
thoroughly with a flat
bottomed paddle or palette
knife to reincorporate any
settled pigment Ensure that the machine is
adequately supported and
clear of obstructions
>
Remove the lids from all
canisters Pour the contents of each
colorant can into the correct
canister. Discard the colorant
can and replace the canister
lid
Attention! Always wear eye protection when handling colorants