Fluid Management 22CW Blendorama - Manual (Page 10)

FAST & FLUID MANAGEMENT
PAGE NO. 10 of 27
CW - V1.2 – 10- 05- 2012 (36609) – rev, B
IV INSTALLATION
C - Ensuring the machine will automatically stir the colorant.
The machine has a mechanical timer that will stir the colorant when turned
from the 0 minutes indication on the dial and continue stirring until the
timer expires. It is very important that the colorant is stirred to ensure
continuous smooth operation of the machine. If left unstirred for extended
periods, colorant can become thick and difficult to stir. This can
ultimately damage the machine. To ensure that the machine stirs the
colorants, please note the following.
LOCKED
>
UNLOCKED
(1) The machine will only start the stirring process
when you turn the timer clockwise to the
desired stirring period. The machine will stop
stirring when the timer expires.
The knob on the left is used to lock or unlock
the turntable.
(2) The power switch at the back of the machine
must be ON for the stirring process to start
when the timer is activated. (Canister refilling for
example).