Fluid Management 22CW Blendorama - Manual (Page 19)

FAST & FLUID MANAGEMENT
PAGE NO. 19 of 27
CW - V1.2 – 10- 05- 2012 (36609) – rev, B
V PREVENTITIVE MAINTENANCE
VI PREVENTITIVE MAINTENANCE
C - Weekly maintenance
> >
Examine the machine for loose
canisters and loose cylinder
caps. Tighten if necessary Examine gauges for
damaged graduated scales or
worn holes and replace if
necessary Raise the pump handle to its
maximum extension and
examine the pump shafts for
signs of colorant. This
indicates that the piston seal
will need replacement (see
Chapter VI - E,F,G)
D - Periodic maintenance
This maintenance should be carried out every 3 to 6 months depending upon use.
>
>
Inspect the function of the
valve and the canister for leaks Ensure that the machine is
disconnected from the power
source Remove canister from
turntable and drain colorant
into a clean container