Fluid Management 22CW Blendorama - Manual (Page 24)

FAST & FLUID MANAGEMENT
PAGE NO. 24 of 27
CW - V1.2 – 10- 05- 2012 (36609) – rev, B
VI GENERAL MAINTENANCE
RED GAUGE
SET TO ZERO
ALLEN
(HEX)
KEY
CHECK
MOVEMENT
>
(5) Using the Allen key, undo the calibration
grubscrew in the red pump handle until free
movement can be felt in the handle. Carefully wind
the grubscrew back down until no free movement
can be felt between the red pump handle and the
red gauge knob.
Be careful not to over-adjust.
(6) The pump is now calibrated.