Brother 580MC - Manual (Page 96)

14 - 4 S E T T I N G U P T H E M F C 6 6 0 M C A N D C O M P U T E R T O W O R K T O G E T H E R
Installing the Multi-Function Link
®
Software
Make sure your MFC 660MC is connected to your PC as described earlier and that
both machines are plugged in and switched on.
Overview of Basic Steps
1
Insert the Brother CD-ROM into your CD-ROM drive and access the Installation
Window.
2
Enter the command for your version of Windows
®
, if needed.
3
Select the option Install Multi-Function Link
®
Software.
4
Follow the installation instructions.
Installing the Brother Software
1
Insert the Brother CD-ROM into your CD-ROM drive.
2
After you insert the Brother CD-ROM, you must type the appropriate command for
your version of Windows
®
, if needed:
• If you are using Windows
®
3.1x, from the Program Manager: Click File, then Run,
then type x:SETUP.EXE. (“x” is the drive letter for your CD-ROM drive.) This will
start the Software Installation program.
• If you are using Windows
®
95/98 or Windows NT
®
Workstation Version 4.0, the
Software Installation program appears automatically when you insert the Brother
CD-ROM.
• For Windows
®
95/98 and Windows NT
®
Workstation Version 4.0, you can also click
Start at the Desktop, select Run and then enter x:\SETUP.EXE. (“x” is the drive letter
for your CD-ROM drive.)
The Brother LOGO will be displayed on the screen.
IMPORTANT
To install the software using Windows NT Workstation
Version 4.0, you must be logged on as the Administrator. R