Brother 580MC - Manual (Page 42)

5 - 3 S E T U P R E C E I V E
Setting F/T Ring Time
You need to determine how long the FAX/MFC will notify you with its special double
ring when you have a voice call. It will ring happens after the initial ringing from the
phone company. Only the FAX/MFC rings for 20, 30, 40 or 70 seconds; no other
phones on the same line ring the special double ring. However, you can answer the call
on any phone on the same line as the FAX/MFC.
1
Press Function/Set , 2 , 2 .
2
Press or to select how long the FAX/MFC
will ring to alert you that you have a voice call and
press
Function/Set .
3
Press Stop to exit.
Now, when a call comes in and the machine is set to FAX/TEL Mode, all phones on
this line will ring the number of times you selected in Ring Delay.
You can let the FAX/MFC pick up and detect if it’s a fax or voice call. If it’s a fax call,
the machine prints the fax. If it’s a voice call, the machine signals you with a double
ring for the length of time you selected in F/T Ring Time.
Record FAX/TEL Outgoing Announcement (F/T OGM)
This is the announcement played by your FAX/MFC (not an external TAD) when
someone calls and your machine is set to FAX/TEL mode. Although callers hear your
announcement, they cannot leave a message. To erase the announcement, follow the
directions on Erasing Outgoing Message (OGM), page 9-3.
1
Press Function/Set , 8 , 3 . The screen prompts you to choose F/T OGM or MSG CTR
OGM.
2
Press or to select F/T OGM (not MSG CTR OGM) and press Function/Set .
3
Press or to select RECORD OGM? and press Function/Set .
Then pick up the handset to record a message.
4
Replace the handset. Your OGM is played.
5
Press Stop to exit.
Even if the caller hangs up during the double ringing, the FAX/MFC continues for
the set time.
R I N G T I M E : 2 0 S E C