Philips 50PF9830A-37B - Manual (Page 80)

76
Digital Camera Issues
If a USB connection between your digital camera and the TV isn’t working, you can try the solutions
below to resolve your problem.
• Make sure your digital camera is switched on and verify if the configuration of your digital camera is
correct (see the manual of your digital camera for more information).
• Some digital cameras allow you to switch off the USB interface. Make sure that the USB interface is
switched on before connecting to the TV.
• Remove the memory card from your digital camera and insert it directly into the digital media reader
on the right side of your TV.
• If you have a digital camera with only internal memory (no removable memory) you can try to copy the
content manually to a memory card or a USB memory device (e.g. Philips KEY product) using a personal
computer.
• Some digital cameras allow you to switch between PTP (Picture Transfer Protocol) or “PC Link” and
USB Mass Storage or “PC Drive”. Make sure that you select USB Mass Storage or “PC Drive” on your
digital camera.
• If your camera supports different interface settings be sure to try them one by one or contact the
reseller of your camera to find out the correct setting.
USB Memory Device Issues
• Devices connected to the USB port of your TV must be “Mass Storage Class” compliant. If your device
(digital camera. MP3 player, portable harddisk, …) is not “Mass Storage Class” compliant it will not be
detected by the content browser of the TV.
• The following subsets of the Mass Storage Class specification are supported:
- The implementation of the TV is based on the “Universal Serial Bus Mass Storage Class Specification
Overview” (v1.2, June 23, 2003) including all documents referenced by the document. The document
can be found on the USB standardisation website (www.usb.org).
- Full support of the USB Mass Storage Class Bulk-Only Transport (bInterfaceProtocol = 50h).
- Full support of SubClass Code = 05h; SFF-8070i spec.
- Full support of SubClass Code = 06h; SCSI transparent command set.
• For large USB memory devices, when you are in the Content Browser, it may take a long time before
you can access your files.
• When using a USB portable harddisk: Due to the high power consumption of the harddisk, it is
advised to use the external power supply of the portable harddisk to guarantee proper working under
all conditions.
2496.1 16x24 en 14-12-2005 10:11 Pagina 76