Philips 50PF9830A-37B - Manual (Page 25)

21
English
Menu preferences
OSD
& Select OSD .
é Press the cursor right to select Normal or
Minimum .
Normal to activate the continuous display of
the channel number (for max. 10 minutes) and
extended display of TV channel and program
information on screen. E.g. information on the
main or auxiliary program, input signal quality
of connected accessory devices, the display
format, sound mode, availability of Closed
Caption service, the audio language, the rating,
sleeptimer setup.
Minimum to activate the display of reduced
channel information.
Note: When Closed Captions is switched on,
continuous display of the channel number and clock
is not possible.
Show emergency alerts (EAS)
This allows you to select the alert priority level of the information disseminated by the cable
operator.The standard SCTE18 defines an Emergency Alert signalling method for use by cable TV
systems to signal emergencies to digital devices such as digital set-top boxes, digital TVs and digital
VCRs.
The Emergency alert signalling scheme defined in the standard allows a cable operator to disseminate
emergency alert information related to state and local-level emergencies and warnings in a cost-
effective and efficient way, while minimizing disruption of programming.
An Emergency alert message will have one of the following priorities:
Low , Medium , High or
Maximum .
The Emergency alert message with priority High or Maximum will always be presented. Low or
Medium will be present or ignored depending on the selected setting.
Important: When the TV clock is undefined (See Setup menu, Clock, p. 24), the Emergency Alerts will be
ignored.
The Emergency Alert message display will contain following information:
- The Emergency Alert text
- The start time + date
- The end time + date.
& Select Show Emergency Alerts in the Menu preferences menu.
é Press the cursor right and select one of the Emergency alerts options:
-
Always , when you always want the Emergency alert messages to be displayed when available;
- Skip low priority , when you want the messages with low level to be ignored;
- Skip low/medium priority , when you only want the messages with high priority to be displayed.
Settings/Setup
Preferences
Picture/sound preferences
Features preferences
Menu preferences
Reset AV settings
Menu preferences
OSD
Show emergency alerts
Change PIN
Info
Note: Emergency Alert Signalling is not possible:
- when content browsing;
- with analogue video sources.
Notes:
- You always have the possibility to remove the message from the screen.
- The message display will overlap whatever menu element or other message is on the screen.
2496.1 16x24 en 14-12-2005 10:11 Pagina 21