Forward operator control console, Ab c d 1, Ignition switch – Buhler 535 User Manual
Page 47: Engine shut down override switch, Rotary beacon switch (optional), Ashtray and cigarette lighter
3-8
435/485/535
F3-19
OVER
RIDE
ACC
OFF
STOP
RUN
START
Forward Operator Control Console
The following description details the controls located
in the forward operator’s console .
Ignition Switch
The ignition switch () has four key positions .
Position A - Accessories “ON,” Engine “OFF”
Position B - Engine and electrical equipment “OFF”
Position C - Warning lights and instruments “ON .”
Engine RUN position .
Position D - Starter motor operates
Engine Shut Down Override Switch
The rocker switch (2) allows the operator to override
the automatic shut down . See “Operating the Engine”
for details on the automatic shut down feature . The
switch should only be used to move the tractor to a
safe area for investigation and repair . Push the top of
the switch to override the shut down system . Push the
bottom of the switch to return to normal (automatic
shut down) operation .
Rotary Beacon Switch (optional)
The rocker switch (3) controls the operation of the
beacon . Push the top of the switch to operate the
beacon . Push the bottom of the switch to turn the
beacon off . Tractors without rotary beacons have a
blanking plate in place of the switch .
Ashtray and Cigarette Lighter
The ashtray (4) can be tilted out for convenient use .
To clean the ashtray, pull it upward and out from the
dash and empty .
The cigarette lighter (page 3-4) is located on the
left of the right hand console . Push the lighter in to
activate . It will automatically pop out when heated .
Return lighter to it’s socket after use .
A
B
C
D
1
F3-16
OVER
RIDE
ACC
OFF
STOP
RUN
START
2
3
4
Section 3 - Operation
Cab Controls & Instruments