Buhler 535 - Manual (Page 103)

3-74
435/485/535
Section 3 - Operation
Hydraulic Operation - Manual
N
L H
M R
N
F3-91
N
ON
STOP
F3-86
N
F3-87
Remote Control Valve Operation - Manual
Up to six remote hydraulic circuits are controlled by
levers located on the right console . These are color-
coded to match the quick couplers at the rear of the
tractor .
The colors are as follows: (from left to right), green ()
blue (2), tan (3) and gray (4) . (Optional - black (5),
white (6) .
NOTE: Tractors with manual hydraulics are fitted with
either Standard Flow System (4 or 6 remote valves),
or High Flow System (6 remote valves). See page 3-82
for details.
The levers have four positions: neutral (7), extend
(raise) (8), retract (lower) (9) and float (0) as
indicated by the decals . When not in use, the levers
should be in the neutral position where they can be
locked to prevent accidental actuation .
For the extend position, the lever () is pulled toward
the operator . This is normally the implement raise
position . An adjustable pressure release detent will
hold the lever in the raised position until the cylinder
reaches the end of its travel, then release to the
neutral position . The lever lockout has no function in
this position .
1
2
3 4
5
6
10
9 7 8
1