Buhler 535 - Manual (Page 187)

4-54
435/485/535
F4-84
Operation 72
HID Work lights (Rear)
To replace a rear HID work light bulb, remove the four
screws () retaining the lamp unit (2) to the casing
and withdraw the lamp unit . Disconnect the plug (3) .
Remove the three screws (4) and the retaining bracket
(5) . Remove the bulb unit (6) . Replace the bulb using
the reverse procedure taking care not to touch the
bulb glass .
WARNING: THIS LAMP UNIT OPERATES AT HIGH
VOLTAGE AND SHOULD BE ISOLATED BEFORE
MAINTENANCE IS CARRIED OUT.
Replacement bulb, P/N: 86034812
Operation 73
Dome Lights
To replace a rear dome light bulb, push in the spring
clip (7) and release the lamp unit from the surround .
Remove the bulb (8) from the lamp unit . Replace the
bulb and refit the lamp unit into the surround .
Replacement bulb, P/N: 9849911
Replacement bulbs can be purchased from your
Buhler Versatile dealer .
7
F4-83
8
1
3
4
6
5
2
Section 4 - Lubrication & Maintenance
As Required