Buhler 535 - Manual (Page 179)

4-46
435/485/535
F4-77
F4-75
Operation 61
Check the Engine Turbocharger Connections
Check the exhaust pipe to turbo outlet clamp () .
Torque the clamp to 9 N .m (80 in . lbs .) . Torque
the lower oil drain line cap screws (2) to 27 N .m
(239 in-lbs) . Tighten the upper oil supply line fitting
(3) to 20 N .m (77 in-lbs)
Tighten the four nuts that mount the turbocharger
to the exhaust manifold of the engine to 6 N .m
(45 ft-lbs) . (Not shown) .
Operation 62
Check the Radiator and Heating System Hoses
Check the upper (4) and lower (5) radiator hoses for
deterioration due to heat or contact with other engine
components . Inspect the fill hose (6) for similar wear
or damage .
If any hoses in the engine cooling system or tractor
heating system require replacement, contact your
Buhler Versatile dealer .
Operation 63
Check the Cab Mounts
The cab is mounted on four rubber mounts in each
corner of the cab .
Check the mounts for wear or deterioration and torque
the mount nut and bolts (7) to 27 N .m (60 ft-lbs) .
Torque the nut and bolts (8) that hold the mounts to
the frame to 97 N .m (72 ft-lbs) .
If the mounts require replacement, contact your
Buhler Versatile dealer .
Section 4 - Lubrication & Maintenance
Every 1500 Hours or Yearly
F4-57
7
8
6
4
5
F4-74
1 2
3