Buhler 535 - Manual (Page 151)

4-8
435/485/535
Section 4 - Lubrication & Maintenance
Every 10 Hours or daily
F4-13
1
F4-14
2
Operation 18
Air Intake Piping / Charge Air piping
Inspect the air intake piping, daily, for cracked hoses,
loose clamps, or punctures that could damage the
engine with particular attention to the two connections
(&2) between the air cleaner and turbocharger .
Tighten or replace parts, as necessary, to make sure
the air intake system does not leak .
Torque Value: 8 .5 N·m (75 in-lbs)
Check for corrosion of the intake system piping
under the clamps and hoses . Corrosion can allow
corrosive products and dirt to enter the intake system .
Disassemble and clean as required .
Inspect the two charge air pipes (3) and four connection
hoses (4) for cracks, loose clamps, or punctures that
could damage the engine .
Tighten or replace parts, as necessary, to make sure
the charge air system does not leak .
Torque Value: 7 .35 N·m (65 in-lbs)
F4-98
3
4