Buhler 535 - Manual (Page 141)

4-8
435/485/535
F4-6
Every 10 Hours
Operation 1
Clean the Front Grille, Hydraulic Cooler, Transmission
Cooler, Air-Conditioning Condenser, Charge Air Cooler
and Fuel Cooler
Access to the components can be gained by opening
the front grille screen . To open the front grille, lift the
latch () and swing the grille outward until it locks in
the fully open position .
The grille screen locking arm (2) must be released
before closing the grille .
Lift the latch lever (3) upward and swing the fuel
cooler/condenser assembly outward using the crossbar
(4) .
The condenser (5), fuel cooler (6), charge air cooler
(7), Hydraulic oil cooler (8) and grille screen (9) are
now exposed and can be thoroughly cleaned using
compressed air . Remove any chaff or debris that has
accumulated in the fins of the components .
Blowing compressed air in both directions through the
fins will clean the components completely . Make sure
that all perimeters of the components are cleaned .
Inspect the coolers for any sign of leakage or
damage .
NOTE: Never use a high-pressure washer to clean out
radiator fins. The fins will be bent over and the radiator
core rendered useless.
Section 4 - Lubrication & Maintenance
Every 10 Hours or Daily
F4-5
1
3
4
5
6 7
8
9
2