Buhler 535 - Manual (Page 123)

3-94
435/485/535
NOTE: Install the wheels so that both center and outer
treads face the same direction.
g . Install the twenty cap screws (6), washers and nuts
through the wheel rims . Torque the nuts to
70 N·m (525 ft-lbs) .
NOTE: The drums on the center and outer wheels have
large cutouts in them to assist in installing the drum
hardware.
h . Repeat the above procedure for the other three
sets of triple wheels .
i . Drive the tractor, steering from lock to lock . Park
the tractor and recheck the torques on the inner and
outer wheel nuts as detailed in Steps e and g .
F3-129
Section 3 - Operation
Wheel Installation - Triple
5
6
Triple Wheel Configuration